The GLONG D-COVER S is a submersible electric pump specifically designed to automatically remove rainwater from winter pool covers.

2 in 1: a pump made for draining pool covers that can also be used as a submersible pump to drain water from technical rooms, sumps and other flooded areas.

With a maximum flow of 7.000 l/h, automatic and manual operation and a compact anti-tip design, it prevents excessive water buildup on the cover without manual intervention after each rain.

Product new and original GLONG, covered by a 2-year warranty.

Performance and features

• Model: GLONG D-COVER S.
• Type: submersible pump for draining pool covers.
• Operation: Automatic and Manual.
• Power: 0,6 HP / 0,4 kW.
• Maximum flow: 7.000 l/h.
• Maximum head: 7 metri.
• Power supply: single-phase 230 V - 50 Hz.
• Maximum current: 1,7 A.
• Degree of protection: IP68.
• Insulation class: B.
• Power cable: 10 metri with Schuko plug.
• Outlet: Gas 1" 1/4 with adaptor G 1" 1/4 - G 1".
• Maximum water temperature: 35°C.
• Maximum immersion: 5 metri.
• Maximum solids passage: 5 mm.
• Dimensions: 40 x 22,3 x 17 cm.
• Weight: approximately 4,6 kg.

No more water pockets on the cover.

During winter, rain can collect on the pool cover creating depressions and water pockets that increase the load on the cover.

The D-COVER S is designed for exactly this use: place it on the cover and it will drain accumulated water before the level becomes excessive.

The compact design, low center of gravity and side outlet help keep it stable during operation.

Automatic operation: when it rains, it works by itself.

Set the selector to AUTO and the pump monitors the water level using its built-in sensors.

When the level reaches approximately 35 mm, the D-COVER S activates automatically and starts pumping out the water.

When the level drops below the sensor threshold, the pump stops automatically after about 15 seconds.

A particularly practical solution during winter months when the pool remains covered for long periods.

Manual mode: when you want full control.

Turn the selector to MANUAL and the D-COVER S can be used like a traditional submersible pump.

In this mode the starting level is approximately 25 mm, with a minimum suction level down to about 15 mm.

This second mode also makes the pump useful for drainage and emptying tasks beyond the pool cover alone.

2 in 1: much more than a simple cover pump.

The GLONG D-COVER S is primarily made to remove water from winter pool covers, but it can also be used as a submersible pump for clear water.

• Pool covers: to remove accumulated rainwater.
• Technical rooms: to drain accidental water buildup.
• Small sumps: for emptying operations compatible with the pump's specifications.
• Flooded basements and rooms: to remove clear water when needed.
• Emptying: usable for drainage operations within the pump's technical limits.

7,000 liters per hour: water doesn't stay on the cover.

With a maximum flow of 7.000 liters per hour and a head up to 7 metri, the D-COVER S moves large volumes quickly while remaining compact.

This is particularly useful after heavy rainfall, when several centimeters of water can accumulate on the cover in a short time.

Anti-tip design.

A standard submersible pump is not necessarily designed to operate on top of a pool cover.

The D-COVER S features a wide, compact body with a low center of gravity and a side discharge, engineered for greater stability when used on the cover.

The dimensions of 40 x 22,3 x 17 cm provide a wide base while keeping the weight around 4,6 kg.

Built to operate submerged.

The pump has an electric motor with thermal protection and an integrated capacitor, with protection rating IP68.

Main components are made of materials designed for use in water:

• Motor: copper.
• Impeller: PA66-GF30.
• Shaft: AISI 304.
• Mechanical seal: SIC & Graphite.
• Insulation class: B.

Easy to position and retrieve.

The 10 metri power cable allows flexible placement of the pump on the cover.

The pump is also supplied with a retrieval rope, useful to place it where water tends to collect most and recover it later without stepping onto the cover.

Included accessories

• 90° elbow fitting.
• Threaded adapter for 1" and 1" 1/4 connections.
• Female / Male threaded adapter 1" 1/4.
• Support base for pump use.
• Rope for positioning and retrieval.
• 10 metri power cable with Schuko plug.
  
  

Simple maintenance.

To keep performance consistent, avoid leaves, dirt or other debris blocking the water intake, impeller or level sensors.

During use, regularly check the area around the pump and keep sensors, water inlet and suction system clean.

Why buy from MetodoBlu?

Our service doesn't end with delivery. We continue to support you after purchase: we are a service center specializing in pool products and equipment, offering technical assistance, spare parts and dedicated support.

• 2-Year Warranty.
• Specialized technical assistance.
• Pre- and post-purchase support.
• Spare parts and post-warranty service.
• Established company with verified reviews.
• Free returns within 14 days.

Free consultation

Unsure if the pump works with your cover? Call or write to us with pool dimensions, cover type and intended use: we'll help verify if the GLONG D-COVER S is the right solution.